This is not a limited edition, although it is serial numbered and I don't think many were made.
The cylinders are in a V configuration with a phase angle of 90 degrees. (However, being single acting, this is not the optimum configuration.) The cylinders are 4mm bore x 7mm stroke and are oscillating cylinders. The port face block is mounted on a decorative pillar with an oil reservoir on top. The two cylinders are fed through a single inlet pipe but each has it's own exhaust pipe. This means that the engine can only be run in one direction and cannot be reversed by reversing the ports.| Make | Peake Engines |
| Model | V2 |
| Made | 2012 |
| Description | Stationary |
| Cylinders | 2 |
| Cylinder Type | single (non-reversible) |
| Piston Diam mm | 4 |
| Stroke mm | 7 |
| Valve Type | Oscillating cylinder |
| Boiler Type | N/A |
| Boiler Diam mm | N/A |
| Boiler length/height mm | N/A |
| Fuel | N/A |
| Mechanical Condition | Good |
| Cosmetic Condition | Good |
| Paintwork | Original |
| Packaging | Tubular cardboard box |
| Purchased | 6/1/2018 |
| Purchase cost | £95.60 |
| Additional spend |